Jack Up Floating Floor – Gymnasiums
FSN Jack Up Floating Floor – Gymnasiums
It has been proven that the most fool-proof and safest way to establish the air gap is the jack-up or lift-slab method. The FSN system ensures there is no bridging of the two elements due to slurry ingress.
Where the gym is located adjacent to a critical area, light-weight options simply won’t do. We have developed and tested our jack up floating floor systems to be used in gymnasiums. The Mason Jack up gymnasium floor is a no compromise solution for footfall, shock and vibration isolation. This type of floor system has been installed well into the thousands all over the world with proven performance.
Applications – Seismic & Non-Seismic
- Rooftop Sports Courts
- Free Weight Areas
- Squat Racks
- Aerobic Rooms
- CrossFit Gyms
- Powerlifting areas
Capacity
- 152kg – 1588kg per mount
Slab Thickness
- 75mm – 300mm
Deflection
- 5mm – 8mm
Options
- Seismic Snubber (SFFS)
- Floor Drain (CFD
Specification
Bell shaped castings with integral lugs to locate reinforcing, shrouding 50mm thick LDS isolators moulded to the following and all other AASHTO bridge bearing specifications. All housings shall have (20mm) minimum diameter jackscrews. Deflections shall not exceed 8mm nor the frequency 9 Hz. Isolators shall be Mason Industries type FSN.
FS Spring Jack Up Floating Floor – Gymnasium & Multipurpose Sports
Situations arise where there is a requirement for a lower natural frequency in the floating floor elements that what can be achieved by a rubber isolator.
We have engineered purpose build jack up isolators which house springs. The springs are installed once the concrete is poured. The slab is jacked into position in the same manner our our FSN type jack up isolators.
Plastic sheeting is placed on the sub-floor as a breaker layer, isolators are placed on the plastic sheeting, reinforcing steel or mesh rests on the isolator housings and the concrete floor is poured. After the concrete has cured, the slab is lifted to elevation by turning adjustment bolts above each isolator to any specified air gap between 25mm -100mm
Applications – Seismic & Non-Seismic
- Rooftop Sports Courts
- Free Weight Areas
- Squat Racks
- Aerobic Rooms
- CrossFit Gyms
- Powerlifting areas
- Treadmills
Capacity
- 204kg – 1331kg per mount
Slab Thickness
- 75mm – 300mm
Deflection
- 25mm – 50mm
Options
- Seismic Snubber (SFFS)
- Floor Drain (CFD)
Specification
Cylindrical shaped castings with integral lugs to locate reinforcing, shrouding 25-50mm deflection spring isolators. All housings shall have threaded compression plates and a neoprene cup to the base of the spring. Isolators shall be Mason Industries type FS.