Spring Isolation Hangers
Y Series Spring Isolation Hangers
Low cost, lightweight and high performance spring hanger isolators. For use installing on top of or under strut, under pipe trapeze or on angle brackets. Most typically used for supporting Fan Control Units. Supplied with our without a cage.
Applications – Non-Seismic
- FCU
- Fans
- Pipework
- Ductwork
Capacity
- 10kg – 60kg
Deflection
- 20mm
Options
- IM-Y Unhoused
- HS-Y Housed
IM Series Spring Isolation Hangers
Light to medium duty seismically rated spring mount. Low profile height – 130mm.
Compliant to AS1170.4
Applications – Non-Seismic
- Fans
- Pumps
- Condensers
- Pipework
- Ductwork
Capacity
- 16kg – 11331kg
Deflection
- 25mm – 53mm
30° Series Spring Isolation Hangers
Light to heavy duty Spring Isolation Hanger. Hanger allows for a 30-degree swing of lower hanging rod. Perfect for installations where suspension points cannot be directly above equipment.
Compliant to AS1170.4 where RW30 is specified
Capacity
- 5kg – 1252kg
Deflection
- 25mm
Options
- Seismic Rebound Washer (RW30)
- Pre-compressed (PC30)
- Pre-compressed & Seismic Rebound Washer (PC30S)
Specification
Hangers shall consist of rigid steel frame containing a steel spring seated in a steel washer reinforced LDS rubber cup on the bottom. The LDS rubber cup shall have moulded bushings projecting through the steel box. In order to maintain stability, the boxes shall not be articulated as clevis hangers. Spring and hanger lower hole diameters shall be large enough to permit the hanger rod to swing through a 30° arc from side to side before contacting the cup bushing and short circuiting the spring. Submittals shall include a hanger drawing showing the 30° capability. Hangers shall be type 30N as manufactured by Mason Industries, Inc.
HS Series Spring Isolation Hangers
Light to heavy duty Spring Isolation Hanger. Single spring to four spring arrays achievable with market leading capacity
Applications – Seismic & Non-Seismic
- Fans
- FCU
- Condensers
- Pipework
- Ductwork
Capacity
- 5kg – 3393kg
Options
- Seismic Rebound Washer (RWHS)
- Pre-compressed (PCHS)
- Pre-compressed & Seismic Rebound Washer (PCHSS)
Deflection
- 25mm – 50mm
Specification
Hangers shall consist of rigid steel frame containing a steel spring seated in a steel washer reinforced LDS rubber cup on the bottom. The LDS rubber cup shall have moulded bushings projecting through the steel box. Hangers shall be type HS as manufactured by Mason Industries, Inc.